ALKcar GM TECH 2 VCI Module Interface VCI for GM Tech2 repair Vetronix Tech II VCI Module repair DIY

ALKcar GM TECH2 VCI Module VCI for GM Tech 2.

GM TECH2 VCI Module is ALKcar VCI module for GM Tech 2. GM Tech-2 VCI is used as a spare part of GM Tech 2. Tech 2 VCI module can only work with GM Tech 2.

GM TECH2 VCI Module VCI for GM Tech 2

VCI Module for GM TECH-2

GM TECH2 VCI Module description:

1. GM TECH2 VCI Module is ALKcar VCI module for GM Tech 2.

2. GM Tech-2 VCI is used as a spare part of GM Tech 2.

3. Tech 2 VCI module can only work with GM Tech 2.

How to use the TECH 2 VCI module?

Firstly, plug out the bad one from the bottom of the tech 2 main unit

Secondly, insert the new tech 2 vci module.

2015年4月7日星期二

ALKcar Silver MID UNIT FLAT RIBBON CABLE For BMWcar E38 E39 X5 MID Radio Pixel Repair Tool

Ribbon cable for BMWcar E39 / E53 MID unit of radio

for MID Radio Pixel Repair Tool For BMWcar E38 E39 X5

The OBC unit on the MID console - also known as radio telephone unit on for BMWcar E39 and X5 models from 1996-2003 are identical, using the same LCD and the same ribbon cable. There are minor differences, like one comes with telephone button, others are witout, however the LCD and the ribbon cable is the same at all 5 series (E39) and X5 (E53) models.

Color: Silver
--------------------------------------------------------------------------------

Ribbon cable for BMWcar E39 / E53 MID unit of radio

for BMWcar E38 E39 M5 X5 MID UNIT FLAT / RIBBON CABLE

for BMWcar E38, E39, X5, radio pixel repair tools

Applicability :E38, E39, X5 cluster repair

for BMWcar E38 E39 M5 X5 radio pixel repair RIBBON CABLE

Installation Steps:

Firstly, Remove the for Audio Meter instrument glass and bottom shell.

Secondly, Cut off the center column needles with the electric heating wire one by one.

Thirdly ,Please take the dial off ,then take the remainder of the needles’ transparent plastic columns out carefully.

Fourthly ,Remove the old Instrument panel wire, then clean both ends of it. (Note: only can be cleaned with alcohol)

Fifthly ,Cut a small triangular hole out with a small knife carefully. Then install the new Instrument panel wire alignment to the original location

Finally , Heat the Article adhesive evenly with T-iron to make cable-fused and then load it after cooling.

for BMWcar E38 E39 M5 X5 MID UNIT FLAT RIBBON CABLE